**Connecting the Threaded Rod**

1. Prepare the M10x1m Threaded Rod x4 and M10 Prong Tee Nut x4

{{:20160407_192854.jpg?200|}} -2

2. Cut the Rod for 22 inch x2 using Hand Saw

{{:20160406_155812.jpg?200|}}
{{:20160406_175952.jpg?200|}} -3

3. Make a suitable size square (ex.5x5cm diameter) to connect the Tee nut, and make a 1cm diameter whole and then connect the Tee nut to the square using Hammer.

{{:20160406_163236.jpg?200|}}
{{:20160406_180004.jpg?200|}} -4

4. Attach the Square to the stand of Y axis and the Moving square of Y axis.

{{:20160408_175819.jpg?200|}} -5

5. Connect the Threaded Rod, the original size is to X-axis and the cutting size is Y-axis.
5-1 before connecting, making a whole in the Y-axis moving whole and then connect the Hook for attaching the Wire.