User Tools

Site Tools


2x4_s

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
2x4_s [2016/04/08 21:24]
salinasmichael
2x4_s [2016/04/08 23:12] (current)
salinasmichael
Line 11: Line 11:
 \\ ** It is important that the holes are as close to the center as possible. ** \\ \\ ** It is important that the holes are as close to the center as possible. ** \\
 \\ ** More importantly you want the center holes to match up on both sides of the wood. If it isn't even then there will be issues with fitment when assembling the chair. ** \\  \\ ** More importantly you want the center holes to match up on both sides of the wood. If it isn't even then there will be issues with fitment when assembling the chair. ** \\ 
 +\\ **__ 1x4 Piece of wood __** \\ 
  
 +\\ Cut the 1x4 into 2, 2' pieces of wood for the arm rests. Use a table saw to cut the piece. \\
2x4_s.txt ยท Last modified: 2016/04/08 23:12 by salinasmichael