User Tools

Site Tools


feedback

This is an old revision of the document!


-Feedback

1. Center of Gravity : The battery was heavey and also located in upperside on the frame, so the airplane couldn't stay blanced. so I move the receiver on the motor bracket, change the batter to the lighter, then move it right next to the bracket.

2. Motor Bracket : I grind the bracket because the small hill in the middle interfere the connection between the motor and the screws.

3. Since the original design has no description of Aileron flap. so I cut the flap part and connect to the body with a half inch distance.

To see how aileron flap moves. check Youtube link : https://youtu.be/HrrO0FM2RUc

In video. Pitch up - Pitch down -Roll left -Roll right movements are described in order

feedback.1464064132.txt.gz · Last modified: 2016/05/23 21:28 by dongbinkim