hard_shell_molds:6._pour_the_first_blanket
1) Pour the silicone slowly from one location and from high up, letting the silicone drift slowly into the detalp on the model. The first layer of silicone is the most important one, because it's what grabs all te detail from your model.
2) With the first layer covering the model, use the palm sander to eliminat any bubbles.
3) When the first layer is just past the taky stage, brush on another layer of silicone, making sure it's of uniform thickness all over the model.
hard_shell_molds/6._pour_the_first_blanket.txt · Last modified: 2016/04/19 13:12 by yeeunkim