User Tools

Site Tools


making_the_x_axis_motor_seats

Making the X axis motor seats

-Drawing part

-front side picture

-back side picture

1. Cut the quadrangle for 6x6inch size x2 and 6x3inch x2

2. Make a whole, 1.4 inch diameter, in the 6x6inch wood to suit for stepper motor! - the center of the whole's position: center of the width (3 inch by widthwise), 2.3inch of the height - It must be considered with motor's center

3. assemble the 6x6inch wood and 4x4inch wood to be perpendicular! - When I screw the 2 structure, It was hard to make it stand perpendicularly, so I screwed the small size square on the both side the structure.

making_the_x_axis_motor_seats.txt · Last modified: 2016/04/01 16:45 by suyonglee