making_the_y_axis_moving_part
Making the Y axis moving part
-1st trial, but it is wrong size
1. Prepare 18” (450nm) Drawer Slide x4
2. Cut the quadrangle for 19x6inch size x2 but, It is too small space to move Y axis, so changed the size.
2-1. Cut the quadrangle for 22x6inch size x2
3. Screw the Drawer Slide to 22x6inch structure from bottom side.
making_the_y_axis_moving_part.txt · Last modified: 2016/04/01 17:00 by suyonglee