\\ **Rok Bak Chair** \\ 
\\ The Rok back chair is a DIY project that utilizes one 1/2" thick, 4' 8'piece of plywood, 8' of 2x4 fir wood, 6' of 1x4 fir wood, and some screws and bolts to hold it all together. \\ 

\\ It takes only a few hours to make once you have all of your materials. It requires minimal skill to complete, and afterwards you should have a comfortable and sturdy chair! \\ 
\\ The original weekend project was posted onto [[http://makezine.com/projects/make-19/rok-bak-chair/|make.com]] by author Larry Cotton. Most of the design Larry originally came up with is still present in this adaptation; however, I have made alterations to better fit my own skill level, time constraints, and most of all to supplement the lack of measurements from the original project. \\
 \\ {{:undefined:rokbakchair.jpg?500|}} \\