Materials to purchase

-I put a photo file of BOM(Bill Of Material) below. the link is described below the photo.

LINK

1. http://www.mcmaster.com/mv1457470370/#catalog/8936T41

2. http://www.mcmaster.com/mv1457470370/#catalog/2153T37

3. http://www.mcmaster.com/mv1457470370/#catalog/2153T32

4. http://www.mcmaster.com/mv1457470370/#catalog/9654K417

5. http://www.mcmaster.com/#7130K101

6. http://www.mcmaster.com/#92095A186

7. http://www.mcmaster.com/#90576A102

8. http://www.mcmaster.com/#92290A055

9. http://www.mcmaster.com/mv1457470370/#catalog/93475A196

10. http://www.mcmaster.com/#91292A831

11. http://www.mcmaster.com/#94150A305

12. http://www.mcmaster.com/#94639A303

13. https://dragonplate.com/ecart/product.asp?pID=3932&cID=93

14. https://www.servocity.com/html/hs-85mg__mighty_micro.html#.VuIogZwrJhE

15. https://www.pololu.com/product/1350

No. 16, 17, 18 parts need to be 3D-Printed. Follow the menu 'How to do 3D-Printing' to make the materials.

16. Corn Bearing.

17. Top plate.

18. Master link end pieces

19. 3D printed plates.