This is an old revision of the document!
Table of Contents
CNC Tormach PCNC 1100 Tutorial 1
Author: Jean Chagas Vaz Email: chagasva@unlv.nevada.edu
Date: Last modified on 01/29/17
Keywords: Tutorial, Machining, step-by-step
This tutorial shows how to engrave text on wood.
Motivation and Audience
Make sure to use safety equipment during the experiment.
* Engraving “DASL@UNLV” on wood.
Materials and Sources
This tutorial assumes the reader has not had any contact with the CNC Tormach PCNC 1100. Therefore, all the basic operations shall be detailed. Useful links can be find below:
| Page Name | Link |
|---|---|
| Tormach PCNC 1100 | https://www.tormach.com/product_pcnc_main.html |
| Mastercan | http://www.mastercam.com/en-us/ |
Procedure
Start-up the machine(See the tutorial 0 on how to properly start the machine)
We will be using ordinary wood 17“ by 3.25”.
Step 1
First: Make sure to use the universal adjusters cubs are well positioned, in order to settle the wood parrelel with the table
Figure 1: wood block settled on the table.
Step 2
Make sure to set the 1“ end mill on the spindle for this tutorial
Figure 2: HSS End Mills
Step 3
Throughout the navigation menu by clicking Conversational>Engrave
at the proper tab type the text that you desire to write: DASL@UNLV
Figure 3: …..
Step 4
Make sure to set the “zero's” axis close to the left bottom corner. Once the tool is at an appropriate position, press the ZERO X; ZERO Y; ZERO Z.
Figure 4: …..
Next, ….
Step 5
Figure 5: …..
Next, ……
Step 6
Now ……
Step 7
When ….
Step 8
Figure 8: ……
Start by setting …..
Step 9
Next,
Commentaries
This tutorial's objective was to …..
dfhkjhsdfkjksdfkj