This is an old revision of the document!
Table of Contents
CNC Tormach PCNC 1100 Tutorial 0
Author: Jean Chagas Vaz Email: chagasva@unlv.nevada.edu
Date: Last modified on 01/18/17
Keywords: Tutorial, Machining, step-by-step
This tutorial presents a short introductory tutorial on how to safely set up the CNC Tormach PCNC 1100. The DASL Machine shop is equipped with a Tormach PCNC 1100.
Motivation and Audience
Setting up the CNC Machine properly is very important. In order to safely turn the CNC machine on follow the steps below:
* Turning on the Tormach PCNC 1100
Materials and Sources
This tutorial assumes the reader has not had any contact with the CNC Tormach PCNC 1100. Therefore, all the basic operations shall be detailed. Useful links can be find below:
Page Name | Link |
---|---|
Tormach PCNC 1100 | https://www.tormach.com/product_pcnc_main.html |
Mastercan | http://www.mastercam.com/en-us/ |
Procedure
Step 1
First: switch the computer on throughout the red button, located on the right side of the machine. In order to turn the computer on flip the switch to the horizontal position.
Figure: Turning ON(switch at the horizontal position)
Step 2
Wait until the computer initiate. Since the e-stop button is locked the software won't let you move the
the axis. If you try to use either jog shuttle or the keyboard the computer will show a message:
Must take machine out of stop before jogging
Step 3
\\Turn the CNC machine on throughout the operator panel by releasing the e-stop machine and
pressing the green button (image on the left)
\\Make sure to push the RESET button on the screen until you hear a characteristic sound. (image on the left)
Figure 3: Setting up the machine.
Step 4
Figure 4: …..
Next, ….
Step 5
Figure 5: …..
Next, ……
Step 6
Now ……
Step 7
When ….
Step 8
Figure 8: ……
Start by setting …..
Step 9
Next,
Commentaries
This tutorial's objective was to …..
dfhkjhsdfkjksdfkj