making_the_x_axis_moving_part
This is an old revision of the document!
Making the X axis moving part
-Drawing part
1. Prepare 24” (600nm) Drawer Slide x4
2. Cut the quadrangle for 32x8inch size x2, 8x6inch size x2, and 19x6inch sixe x2(reuse the wrong size Y-axis board)
3. Make a whole in 19x6inch board, this whole sixe is same to the X axis motor seats.
(upload soon)
making_the_x_axis_moving_part.1459568054.txt.gz · Last modified: 2016/04/01 20:34 by suyonglee